0.5.8.9->1.0.6

General support for problems installing or using Deluge
barjac
Member
Member
Posts: 16
Joined: Sun Sep 28, 2008 5:40 pm

Re: 0.5.8.9->1.0.6

Post by barjac »

Hi - sorry for the veering. This effect of around 19-20 difference seems to be linked to an effect I was seeing in this thread :-
http://forum.deluge-torrent.org/viewtop ... =7&t=12795
"The problem was different but that figure came up - to quote myself in that thread:- "OK So I removed 1.0.0 and made a fresh build of 1.0.4. On first run it picked up everything and started seeding. I then QUIT it and re-started. Same - no problem. I then re-started the machine with it running and on re-boot and starting Deluge all torrents were shown as checking 0.00%. Two (out of 21) re-checked fine and started seeding, but after five minutes now the rest are not doing anything. Right-click on a torrent and "Force recheck" does nothing........"
You would need to read it all to see what was going on, but I am sure that this is related to what you are seeing.
No solution I'm afraid but it may help the devs.
lvm
Seeder
Seeder
Posts: 130
Joined: Sat Apr 19, 2008 6:05 am

Re: 0.5.8.9->1.0.6

Post by lvm »

lvm wrote:2. A huge delay and high CPU usage when preferences dialog is opened, closed or saved (applied): restarting deluge fixed this problem completely - responses became instantaneous, but after several days it started to slow down again - not as bad as the first time yet, currently delay is about 1-2 seconds, but it definitely grows. Some garbage collection problem?
...and it is an interface problem - this delay is reset by restarting just deluge, not deluged.
Post Reply