Win 10 - v1.3.11 - Not Seeding

Specific support for Deluge on Microsoft Windows OS
mhertz
Compulsive Poster
Compulsive Poster
Posts: 798
Joined: Wed Jan 22, 2014 5:05 am
Location: Denmark

Re: Win 10 - v1.3.11 - Not Seeding

Postby mhertz » Tue Feb 18, 2020 10:34 am

Shamael, Rofl! :lol: I appreciate you shamael :) (nohomo - I know you know what I mean :) )

ICMC, I don't have anything other to add considering the good advice you already gotten, so all I can suggest is maybe try using a newer libtorrent, e.g courtesy of Nekotan for latest deluge 1.3.15: viewtopic.php?t=55168

Also, as said already, it's hard to know where you are in swarm, or how it was put. When I test something with a Linux ISO very popular and for sure properly connectable and unfirewalled, then often I don't upload for long time and when does, then also slow often, so it's sometimes hard to know if normal or not, though if you're connectable and unfirewalled, as you already tested properly, then it should work though. .

xblliss
New User
New User
Posts: 3
Joined: Sun Apr 19, 2020 5:34 pm

Re: Win 10 - v1.3.11 - Not Seeding

Postby xblliss » Sun Apr 19, 2020 6:01 pm

I am on Win 8.1 using 1.3.13 (Approved by private tracker) and can download but cant seed for ratio.

Also my Deluge shows:
No incoming connections
Yellow Triangle inside Deluge.

I have tried to enable all I can on Windows Firewall - even disabled it at times. No incoming connections.

I have a Mikrotik Router with UPnP enabled, but still dont see anyting.

What did you do to get it to work - Even slow speed is fine as long as I atleast get it STARTED - Speed issues later.

shamael
Compulsive Poster
Compulsive Poster
Posts: 574
Joined: Sat Oct 08, 2016 9:28 am

Re: Win 10 - v1.3.11 - Not Seeding

Postby shamael » Mon Apr 20, 2020 8:51 am

xblliss wrote:I am on Win 8.1 using 1.3.13 (Approved by private tracker) and can download but cant seed for ratio.

Also my Deluge shows:
No incoming connections
Yellow Triangle inside Deluge.

I have tried to enable all I can on Windows Firewall - even disabled it at times. No incoming connections.

I have a Mikrotik Router with UPnP enabled, but still dont see anyting.

What did you do to get it to work - Even slow speed is fine as long as I atleast get it STARTED - Speed issues later.


Try to avoid the UPNP, security reason in mind (Google will tell you the whole story). Disabling the UPNP on the router and makes your setup manually is something you may consider? Mainly we speak here about configuring:
- a fix IP for the device used by Deluge
- Configure Deluge's incoming port on a high range, 57000-57010 is fine in (only one used, but if another app use one of them Deluge will simply select the next one).
- Nat this port range from outside to the fixed IP defined at first step in your router interface
- open the Deluge network tab in preferences, check incoming port selected and test reachability with for exemple https://www.yougetsignal.com/tools/open-ports/


Return to “Windows OS”

Who is online

Users browsing this forum: No registered users and 4 guests