Page 1 of 1
Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triangle.
Posted: Sat May 21, 2016 3:13 pm
by Dittle
I don't know if it is because my router is blocking something or what. I was hoping it would be the same connection I had through just my modem but no luck. The router I have is a Linksys EA6400. Does anyone have experience with this router and know how to fully open it up to use with Deluge?
Re: Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triang
Posted: Sat May 21, 2016 4:54 pm
by Shryp
You have to set up the port forwarding through the router. The uPnP setting might work, but manual configuration is better.
Re: Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triang
Posted: Sat May 21, 2016 5:13 pm
by Dittle
I forwarded port range 50000-65000 and it accepted the change I made but no ports show as open still. I must be missing something...
Re: Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triang
Posted: Sat May 21, 2016 5:17 pm
by Shryp
You really only need one port (as long as nothing else steals it while deluge is closed). I just set the min and max to the same number on mine and then forward that single port through my router.
Re: Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triang
Posted: Sat May 21, 2016 6:48 pm
by Dittle
Hmm, I tried just doing 1 port. It still does not show as open when I test. Is it necessary to have a static ip address to use port forwarding?
Re: Testing active port gave the green dot before I had a wifi router, now through the router im getting a yellow triang
Posted: Sat May 21, 2016 10:50 pm
by Shryp
No. You have a firewall issue somewhere.