Howto: testing 0.6 using deluged + webui (headless *nix)

[johnnyg]

you should be able to ssh in and run

Code: Select all

deluge -u gtk

to do this

[xternal]

Thanks for the reply, doesnt seem to work though, no -u option
Also the script is asking for /usr/bin/deluged but i dont have that
Thanks for all the information so far.

[johnnyg]

what version are you running?
this howto was for version 0.6 (i.e. the latest RCs).
the latest version has installs deluged (deluge daemon) and definitely supports the -u option.

[mcuerdo]

Hi, I just want to share the init script I'm using. If anyone knows how to improve it, please do!:

Code: Select all

#! /bin/sh
### BEGIN INIT INFO
# Provides:          deluged
# Required-Start:    $local_fs $remote_fs
# Required-Stop:     $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      S 0 1 6
# Short-Description: Start/Stop Deluge Daemon
# Description:       Deluge Bitorrent Daemon
### END INIT INFO

# Author: Nanet <nanet.public-at-gmail.com>
#
# Edit to match your config, test it, and when you're satisfied
# run "sudo update-rc.d deluge-daemon defaults" to install the system script

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/usr/sbin:/usr/bin:/sbin:/bin
DESC="Deluge Bitorrent Daemon"
NAME=deluged
########## Change logfile if needed
LOGFILE=/var/log/deluge/deluged.log
DAEMON=/usr/bin/$NAME
DAEMON_ARGS="--logfile=$LOGFILE"
RUNDIR=/var/run/$NAME
########## For the moment deluge does not support pid file
PIDFILE=$RUNDIR/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
########## Change priority (the lower the higher)
NICE=5
########## Change user to match yours
USER=nas

#mkdir -p $RUNDIR
#chown -R $USER $RUNDIR

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
	
	####### Once deluge supports pid file we must check the following line and other calls to start-stop-daemon
	#start-stop-daemon --start --quiet --pidfile $PIDFILE --chuid $USER --nicelevel $NICE --exec $DAEMON"
	
	start-stop-daemon --start --quiet --chuid $USER --nicelevel $NICE --exec $DAEMON --test > /dev/null \
		|| return 1
	start-stop-daemon --start --quiet --chuid $USER --nicelevel $NICE --exec $DAEMON -- \
		$DAEMON_ARGS \
		|| return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --chuid $USER --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --chuid $USER --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --chuid $USER --nicelevel $NICE --name $NAME
	return 0
}

case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
	do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  #reload|force-reload)
	#
	# If do_reload() is not implemented then leave this commented out
	# and leave 'force-reload' as an alias for 'restart'.
	#
	#log_daemon_msg "Reloading $DESC" "$NAME"
	#do_reload
	#log_end_msg $?
	#;;
  restart|force-reload)
	#
	# If the "reload" option is implemented then remove the
	# 'force-reload' alias
	#
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
	  	# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
	exit 3
	;;
esac

:

[BuzzD]

Here's my take on it, using the somewhat standard /etc/init.d/*-daemon, /etc/default/*-daemon combo. I managed to get it so /var/run/*.pid files are generated, so no need for grepping and awking to stop the daemon.

You have to specify the user in /etc/default/deluge-daemon. You can also choose whether or not the daemon will run on startup.

/etc/default/deluge-daemon

Code: Select all

# Configuration for /etc/init.d/deluge-daemon

# The init.d script will only run if this variable non-empty.
DELUGED_USER="deluge"

# Should we run at startup?
RUN_AT_STARTUP="YES"

/etc/init.d/deluge-daemon

Code: Select all

#!/bin/sh
### BEGIN INIT INFO
# Provides:          deluge-daemon
# Required-Start:    $local_fs $remote_fs
# Required-Stop:     $local_fs $remote_fs
# Should-Start:      $network
# Should-Stop:       $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Daemonized version of deluge and webui.
# Description:       Starts the deluge daemon with the user specified in
#                    /etc/default/deluge-daemon.
### END INIT INFO

# Author: Adolfo R. Brandes <arbrandes@gmail.com>

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="Deluge Daemon"
NAME1="deluged"
NAME2="deluge"
DAEMON1=/usr/bin/deluged
DAEMON1_ARGS="-d"
DAEMON2=/usr/bin/deluge
DAEMON2_ARGS="-u web"
PIDFILE1=/var/run/$NAME1.pid
PIDFILE2=/var/run/$NAME2.pid
PKGNAME=deluge-daemon
SCRIPTNAME=/etc/init.d/$PKGNAME

# Exit if the package is not installed
[ -x "$DAEMON1" -a -x "$DAEMON2" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$PKGNAME ] && . /etc/default/$PKGNAME

# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

if [ -z "$RUN_AT_STARTUP" -o "$RUN_AT_STARTUP" != "YES" ]
then
	log_warning_msg "Not starting $PKGNAME, edit /etc/default/$PKGNAME to start it."
	exit 0
fi

if [ -z "$DELUGED_USER" ]
then
    log_warning_msg "Not starting $PKGNAME, DELUGED_USER not set in /etc/default/$PKGNAME."
    exit 0
fi

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
	start-stop-daemon --start --background --quiet --pidfile $PIDFILE1 --exec $DAEMON1 \
		--chuid $DELUGED_USER --user $DELUGED_USER --test > /dev/null
	RETVAL1="$?"
	start-stop-daemon --start --background --quiet --pidfile $PIDFILE2 --exec $DAEMON2 \
		--chuid $DELUGED_USER --user $DELUGED_USER --test > /dev/null
	RETVAL2="$?"
	[ "$RETVAL1" = "0" -a "$RETVAL2" = "0" ] || return 1

	start-stop-daemon --start --background --quiet --pidfile $PIDFILE1 --make-pidfile --exec $DAEMON1 \
		--chuid $DELUGED_USER --user $DELUGED_USER -- $DAEMON1_ARGS
	RETVAL1="$?"
        sleep 2
	start-stop-daemon --start --background --quiet --pidfile $PIDFILE2 --make-pidfile --exec $DAEMON2 \
		--chuid $DELUGED_USER --user $DELUGED_USER -- $DAEMON2_ARGS
	RETVAL2="$?"
	[ "$RETVAL1" = "0" -a "$RETVAL2" = "0" ] || return 2
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --user $DELUGED_USER --pidfile $PIDFILE2
	RETVAL2="$?"
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --user $DELUGED_USER --pidfile $PIDFILE1
	RETVAL1="$?"
	[ "$RETVAL1" = "2" -o "$RETVAL2" = "2" ] && return 2

	rm -f $PIDFILE1 $PIDFILE2

	[ "$RETVAL1" = "0" -a "$RETVAL2" = "0" ] && return 0 || return 1
}


case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME1"
	do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME1"
	do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  restart|force-reload)
	log_daemon_msg "Restarting $DESC" "$NAME1"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
	  	# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
	exit 3
	;;
esac

:

Hi. I've managed to start the daemon with your script. But it won't start when the system is booting. What did I miss?

[johnnyg]

Hi. I've managed to start the daemon with your script. But it won't start when the system is booting. What did I miss?

1. Put the config and the script in /etc/default and /etc/init.d/ respectively
2. Make the script executable

   Code: Select all

   sudo chmod 755 /etc/init.d/deluge-daemon

3. Update the rc.d symlinks

   Code: Select all

   sudo update-rc.d deluge-daemon defaults

Once you've done those steps, it should automatically run on startup.

[BuzzD]

Had done this already.

So I will have to take a look at what the bootlog is saying...

Edit: Hm. after rebooting a few more time its seems to work now. lets hope it stays that way.

Thank you all for helping me!

[tstack77]

I've tried running the script but have run into a few problems. Do I need my server to be running x for deluge to start/run?

[johnnyg]

I've tried running the script but have run into a few problems. Do I need my server to be running x for deluge to start/run?

for deluge - yes,
for deluged - no.

[tstack77]

Thanks, that's what I thought too. The only reason I was asking is because after the webui didn't start with the scripts, I tried it manually from the command line. When I start 'deluged' and 'deluge -u web', I still cannot access the webui. I am asked for the password but then it displays that it is 'Not connected to a Daemon'. When I try to connect I get the Connection refused error.

Any ideas where I went wrong?