OS: XP
Deluge local: 1.34 and 1.35
Deluge Server 1.34
No plug ins
I had deluge 1.34 running fine. Upgraded to 1.35, all went well and running fine.
This morning I enabled extractor. Immediately afterwards I could not load magnet links into deluge, either by double clicking the link or manually adding the link into Deluge.
Double click the link, the windows opens, click "add" and nothing happens. Manually try to add the link, the same issue.
I removed and re installed Deluge 1.35 twice, same problem. I installed version 1.34, same problem.
I removed Deluge and went through the reg making sure to delete any leftovers, same results. I can add torrents only by downloading the torrent file, which are getting harder to find. Driving me nuts.
Any help, suggestions gladly taken.
(Solved) Magnet Links will not load into client
Re: (Solved) Magnet Links will not load into client
Finally determined that it was a local registry issue.
For one reason or another, Deluge does not change the registry entry, even through repeated attempts to have it associated with magnet links. Preferences>Other>Associate deluge with Magnet Links.
Made the repair as per this page: https://forum.suprbay.org/showthread.php?tid=115481
After I manually added the entry to the registry, all is right with the world now.
For one reason or another, Deluge does not change the registry entry, even through repeated attempts to have it associated with magnet links. Preferences>Other>Associate deluge with Magnet Links.
Made the repair as per this page: https://forum.suprbay.org/showthread.php?tid=115481
After I manually added the entry to the registry, all is right with the world now.
Re: (Solved) Magnet Links will not load into client
Thanks royhobbs, I am having a similar problem,
If I am using an older version of utorrent and Deluge 1.3.5 for magnet links, Deluge will not asscociate the magnet links.
Your link to those reg entries do not list one for Deluge.
If I am using an older version of utorrent and Deluge 1.3.5 for magnet links, Deluge will not asscociate the magnet links.
Your link to those reg entries do not list one for Deluge.
Re: (Solved) Magnet Links will not load into client
I recently had the same issue after installing u_torrent. I need 2 torrent programs because of private trackers that do not allow DHT.
U_torrent associated itself with magnet links which I didn't want it to do and the button in the deluge settings doesn't actually do anything.
I scoured the internet for about an hour trying to find a solution because the link in this post is dead.
To resolve this issue in 64bit windows open notepad and copy the following text:
Save as, choose desktop as the location and "all files" as file type then call it something like mag.reg
once you run the reg file hey presto magnets now working with deluge again.
If you have 32bit windows use the following
U_torrent associated itself with magnet links which I didn't want it to do and the button in the deluge settings doesn't actually do anything.
I scoured the internet for about an hour trying to find a solution because the link in this post is dead.
To resolve this issue in 64bit windows open notepad and copy the following text:
Code: Select all
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Classes\magnet]
@="URL:MAGNET URI"
"URL Protocol"=""
[HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon]
@="C:\\Program Files (x86)\\Deluge\\deluge.exe"
[HKEY_CURRENT_USER\Software\Classes\magnet\shell]
[HKEY_CURRENT_USER\Software\Classes\magnet\shell\open]
[HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command]
@="C:\\Program Files (x86)\\Deluge\\deluge.exe \"%1\""
once you run the reg file hey presto magnets now working with deluge again.
If you have 32bit windows use the following
Code: Select all
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Classes\magnet]
@="URL:MAGNET URI"
"URL Protocol"=""
[HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon]
@="C:\\Program Files\\Deluge\\deluge.exe"
[HKEY_CURRENT_USER\Software\Classes\magnet\shell]
[HKEY_CURRENT_USER\Software\Classes\magnet\shell\open]
[HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command]
@="C:\\Program Files\\Deluge\\deluge.exe \"%1\""
Re: (Solved) Magnet Links will not load into client
This worked beautifully on my machine running Windows 7. Thank you.Piney wrote:I recently had the same issue after installing u_torrent. I need 2 torrent programs because of private trackers that do not allow DHT.
U_torrent associated itself with magnet links which I didn't want it to do and the button in the deluge settings doesn't actually do anything.
I scoured the internet for about an hour trying to find a solution because the link in this post is dead.
To resolve this issue in 64bit windows open notepad and copy the following text:
Save as, choose desktop as the location and "all files" as file type then call it something like mag.regCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files (x86)\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files (x86)\\Deluge\\deluge.exe \"%1\""
once you run the reg file hey presto magnets now working with deluge again.
If you have 32bit windows use the followingCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files\\Deluge\\deluge.exe \"%1\""
Re: (Solved) Magnet Links will not load into client
Works on Windows 10 Pro 64bit as well.Piney wrote:I recently had the same issue after installing u_torrent. I need 2 torrent programs because of private trackers that do not allow DHT.
U_torrent associated itself with magnet links which I didn't want it to do and the button in the deluge settings doesn't actually do anything.
I scoured the internet for about an hour trying to find a solution because the link in this post is dead.
To resolve this issue in 64bit windows open notepad and copy the following text:
Save as, choose desktop as the location and "all files" as file type then call it something like mag.regCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files (x86)\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files (x86)\\Deluge\\deluge.exe \"%1\""
once you run the reg file hey presto magnets now working with deluge again.
If you have 32bit windows use the followingCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files\\Deluge\\deluge.exe \"%1\""
Re: (Solved) Magnet Links will not load into client
Thanks a lot, it works perfectly on my Windows 10 Pro 64bit too!Piney wrote:I recently had the same issue after installing u_torrent. I need 2 torrent programs because of private trackers that do not allow DHT.
U_torrent associated itself with magnet links which I didn't want it to do and the button in the deluge settings doesn't actually do anything.
I scoured the internet for about an hour trying to find a solution because the link in this post is dead.
To resolve this issue in 64bit windows open notepad and copy the following text:
Save as, choose desktop as the location and "all files" as file type then call it something like mag.regCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files (x86)\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files (x86)\\Deluge\\deluge.exe \"%1\""
once you run the reg file hey presto magnets now working with deluge again.
If you have 32bit windows use the followingCode: Select all
Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Classes\magnet] @="URL:MAGNET URI" "URL Protocol"="" [HKEY_CURRENT_USER\Software\Classes\magnet\DefaultIcon] @="C:\\Program Files\\Deluge\\deluge.exe" [HKEY_CURRENT_USER\Software\Classes\magnet\shell] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open] [HKEY_CURRENT_USER\Software\Classes\magnet\shell\open\command] @="C:\\Program Files\\Deluge\\deluge.exe \"%1\""