deluge 1.3.1 wont load after install
deluge 1.3.1 wont load after install
Hello everyone. I downloaded deluge 1.3.1 (http://download.deluge-torrent.org/wind ... -setup.exe) and after I installed it I went to launch the shortcut on my desktop and it did not load. I have tried reinstalling, uninstalling, restarting, installing again, tried downloading an older 64 bit version as I thought that may have been the problem but even the older version didn't load, it would attempt to load and then freeze. I am on windows 7 64 bit. I have no idea what to do if anyone has any advice it would be greatly appreciated.
Re: deluge 1.3.1 wont load after install
Same Problem:
I installed 1.3.1. start with the icon. nothing. I tried another windows 7. The same. (both are win7 x64)
I deinstalled the gtk like in the faq and reinstalled everything. After a couple un- and install nothing Changed.
I can start the deluge-gtk.exe. The Interface is working. This would be fine for me. I just need to connect to a linux deamon. But i can not save any changes because the gtk always crashes when i close the window. Then i have to kill the deluge-gtk.exe with the task-manager.
If I run the deluge-debug.exe i get:
When i start deluge.exe -L debug -l z:\deluge-gtk.log
thx for help
I installed 1.3.1. start with the icon. nothing. I tried another windows 7. The same. (both are win7 x64)
I deinstalled the gtk like in the faq and reinstalled everything. After a couple un- and install nothing Changed.
I can start the deluge-gtk.exe. The Interface is working. This would be fine for me. I just need to connect to a linux deamon. But i can not save any changes because the gtk always crashes when i close the window. Then i have to kill the deluge-gtk.exe with the task-manager.
If I run the deluge-debug.exe i get:
Code: Select all
C:\Program Files (x86)\Deluge>deluge-debug.exe
Traceback (most recent call last):
File "<string>", line 6, in <module>
File "__main__.py", line 105, in <module>
File "__main__deluge-debug__.py", line 9, in <module>
File "deluge\main.py", line 121, in start_ui
File "deluge\ui\ui.py", line 121, in __init__
File "deluge\config.py", line 406, in save
IndexError: list index out of range
Code: Select all
[INFO ] 18:11:09 main:114 Deluge ui 1.3.1
[DEBUG ] 18:11:09 main:115 options: {'loglevel': 'debug', 'default_ui': None, 'args': None, 'quiet': False, 'ui': None, 'logfile': 'z:\\deluge-gtk.log', 'config': None}
[DEBUG ] 18:11:09 main:116 args: []
[DEBUG ] 18:11:09 main:117 ui_args: []
[INFO ] 18:11:09 main:120 Starting ui..
[DEBUG ] 18:11:09 ui:109 UI init..
[DEBUG ] 18:11:09 configmanager:111 Getting config 'ui.conf'
[DEBUG ] 18:11:09 config:197 Setting 'default_ui' to gtk of <type 'str'>
[DEBUG ] 18:11:09 config:388 Config C:\Users\jan\AppData\Roaming\deluge\ui.conf version: 1.1 loaded: {'default_ui': 'gtk'}
Re: deluge 1.3.1 wont load after install
OK, found it...
sometime if you write down everything...
I deleted the hole C:\Users\jan\AppData\Roaming\deluge\ folder. It looks like u had a old 1.1.9 install and configs in there...
Have fun
sometime if you write down everything...
I deleted the hole C:\Users\jan\AppData\Roaming\deluge\ folder. It looks like u had a old 1.1.9 install and configs in there...
Have fun
Re: deluge 1.3.1 wont load after install
I have problem with load after clean install as well... when I run debug it seems like this:
and after runing deluge.exe -L debug -l c:\deluge-gtk.log
Any suggestions? I properly installed gtk2 from deluge installation and set it to /bin path as wel...
Thanks for answer.
Code: Select all
[ERROR ] 21:55:39 config:436 Error backing up old config..
[ERROR ] 21:55:39 __init__:1080 DLL load failed: The specified module could no
t be found.
Traceback (most recent call last):
File "deluge\ui\ui.py", line 127, in __init__
File "deluge\ui\gtkui\__init__.py", line 1, in <module>
File "deluge\ui\gtkui\gtkui.py", line 45, in <module>
File "gtk/__init__.py", line 40, in <module>
File "gtk/_gtk.py", line 14, in <module>
ImportError: DLL load failed: The specified module could not be found.
[ERROR ] 21:55:39 ui:147 There was an error whilst launching the request UI: g
tk
[ERROR ] 21:55:39 ui:148 Look at the traceback above for more information.
Code: Select all
[INFO ] 22:09:25 main:114 Deluge ui 1.3.1
[DEBUG ] 22:09:25 main:115 options: {'loglevel': 'debug', 'default_ui': None, 'args': None, 'quiet': False, 'ui': None, 'logfile': 'c:\\deluge-gtk.log', 'config': None}
[DEBUG ] 22:09:25 main:116 args: []
[DEBUG ] 22:09:25 main:117 ui_args: []
[INFO ] 22:09:25 main:120 Starting ui..
[DEBUG ] 22:09:25 ui:109 UI init..
[DEBUG ] 22:09:25 configmanager:111 Getting config 'ui.conf'
[DEBUG ] 22:09:25 config:197 Setting 'default_ui' to gtk of <type 'str'>
[DEBUG ] 22:09:25 config:388 Config C:\Users\Sparhawk\AppData\Roaming\deluge\ui.conf version: 1.1 loaded: {'default_ui': u'gtk'}
[INFO ] 22:09:25 ui:126 Starting GtkUI..
[ERROR ] 22:09:25 __init__:1080 DLL load failed: The specified module could not be found.
Traceback (most recent call last):
File "deluge\ui\ui.py", line 127, in __init__
File "deluge\ui\gtkui\__init__.py", line 1, in <module>
File "deluge\ui\gtkui\gtkui.py", line 45, in <module>
File "gtk/__init__.py", line 40, in <module>
File "gtk/_gtk.py", line 14, in <module>
ImportError: DLL load failed: The specified module could not be found.
[ERROR ] 22:09:25 ui:147 There was an error whilst launching the request UI: gtk
[ERROR ] 22:09:25 ui:148 Look at the traceback above for more information.
Any suggestions? I properly installed gtk2 from deluge installation and set it to /bin path as wel...
Thanks for answer.
-
- Moderator
- Posts: 315
- Joined: Sat Aug 18, 2007 2:28 pm
- Location: Pittsburgh, USA
Re: deluge 1.3.1 wont load after install
Sounds like this problem.Sparhawk wrote: Any suggestions? I properly installed gtk2 from deluge installation and set it to /bin path as wel...
Thanks for answer.
Re: deluge 1.3.1 wont load after install
well sry, but no.. even after uinistall/install GTK, deluge still doesnt work....gazpachoking wrote:Sounds like this problem.Sparhawk wrote: Any suggestions? I properly installed gtk2 from deluge installation and set it to /bin path as wel...
Thanks for answer.
I tried reinstall GTK or even Deluge several times, but still I cant run it...
-
- Moderator
- Posts: 315
- Joined: Sat Aug 18, 2007 2:28 pm
- Location: Pittsburgh, USA
Re: deluge 1.3.1 wont load after install
Uninstalling/reinstalling is usually not enough to clear the problem. Did you delete all the gtk folders before re-installing gtk?Sparhawk wrote:well sry, but no.. even after uinistall/install GTK, deluge still doesnt work....gazpachoking wrote:Sounds like this problem.Sparhawk wrote: Any suggestions? I properly installed gtk2 from deluge installation and set it to /bin path as wel...
Thanks for answer.
I tried reinstall GTK or even Deluge several times, but still I cant run it...
Re: deluge 1.3.1 wont load after install
yes, if u mean all folders in GTK2-Runtime.
-
- New User
- Posts: 4
- Joined: Wed May 04, 2011 6:19 pm
Re: deluge 1.3.1 wont load after install
I am having similar symptoms but a different error message when I run deluge-debug. I have uninstalled, deleted, reboot and then reinstalled the gtk-runtime and checked the path statements to ensure it includes the bin directory. I also cannot get the deluge -L debug -l mine.log to output, so I cannot post it here.
Here is my path statement:
Here is the error message:
Here is my path statement:
Code: Select all
C:\Program Files\Deluge>echo %path%
C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\GtkSharp\2.12\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\GTK2-Runtime\bin;C:\Program Files\OpenVPN\Client 2.1.1\bin;C:\Users\My Dropbox\Download
Code: Select all
C:\Program Files\Deluge>deluge-debug
[ERROR ] 14:39:46 __init__:1080 DLL load failed: The specified module could not be found.
Traceback (most recent call last):
File "deluge\ui\ui.py", line 127, in __init__
File "deluge\ui\gtkui\__init__.py", line 1, in <module>
File "deluge\ui\gtkui\gtkui.py", line 45, in <module>
File "gtk/glade.py", line 14, in <module>
ImportError: DLL load failed: The specified module could not be found.
[ERROR ] 14:39:46 ui:147 There was an error whilst launching the request UI: gtk
[ERROR ] 14:39:46 ui:148 Look at the traceback above for more information.
-
- New User
- Posts: 4
- Joined: Wed May 04, 2011 6:19 pm
Re: deluge 1.3.1 wont load after install
Any progress on this? I have tried it on a completely clean Windows 7 VM since the last time, to no avail.
-C
-C